Attached to any air source or filter panel, the Remote CO Monitor alerts workers using supplied air respirators when the level of carbon monoxide has exceeded 10 ppm.  The CO monitor can be operated in AC or DC mode and uses a single 9-volt alkaline battery.  Maximum regulator inlet pressure is 150 psi.

The remote CO Alarm System uses a 50' cable to go with workers into the work area and effectively warn of the presence of carbon monoxide in the air source with a 90 decibel alarm, and in very noisy environments, a flashing strobe light.  The system is housed in a rugged Pelican carry case or may be wall mounted, and attached to any Allegro Air Filtration Panel as shown.

Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel's disposable filters by removing liquids and contaminates down to 5 microns.  It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirements for point-of-attachment.

Used to test the accuracy of the CO Monitor on Allegro's Carry Air, Wall-Air or Oil-Less Compressor.  Kit includes a 17 liter cylinder each of oxygen and CO, a constant flow pressure regulator with gauge and tubing in a plastic carrying case.

A compact, lightweight and convenient way to make a quick check of CO Monitors.  It eliminates the need for weekly or monthly calibrations.  Includes an 11 liter cylinder and a balloon adapter and two balloons.